Wista 45SP large format/medium format camera with a 4x5 Graflok + 6x9 sliding back. The camera movements function perfectly. One locking lever for the top rail is broken but this doesn't impact function and likely can be replaced by a handy person.
Explanation:There are two locking levers for the sliding top rail which can be moved according to your lens requirements. The rear lever is sheared off so the tightening screw cannot be adjusted by hand. The rail still stays in place and you can use the other lever to lock it or unlock it. If you need to tighten the screw you can use a very flat screwdriver/lens wrench. A 3d printed part will work as well.
Sadly I lack the skills to make one but should be easy to do. The graflok 4x5 back is made for an older Wista 45D, but it fits perfectly here and I rather like the contrast of black on silver on black again. The ground glass is new, OEM and super clear. The hood is also in perfect condition. The 6x9 sliding back works as expected. The Graflok roll film back loads and works as expected. If you'd like a different lens or an additional lens, let me know. I do have a 135mm Nikkor W f/5.6 and a Calamut Caltar-S II 150mm MC (Schneider Symmar S I beleive), I'd be willing to part with but I haven't looked into pricing or listing them.